CIVIC B16 B18 B16A FULL DRAG RACING "EARCLUFF" TURBO MANIFOLD

B SERIES FULL " DRAG RACE " MANIFOLD
HUGE PRIMARIES
TIG WELDED
35/38 MM 2 BOLT WASTEGATE FLANGE
T3/T4 TURBO FLANGE
304 STAINLESS STEEL CONSTRUCTION

HONDA B SERIES TURBO MANIFOLD / DOWNPIPE / WASTEGATE
Domestic Shipping: $40
International Shipping: $75

Equal Length Tubular Stainless Steel Turbo Manifold

304 STAINLESS STEEL CONSTRUCTION
2.7 MM THICK TO PREVENT CRACKING
FITS T3 AND T3/T4 HYBRID TURBOS
FITS ANY 2 BOLT EXTERNAL WASTEGATE
BLOCK & TURBO GASKETS INCLUDED
WASTEGATE FLANGE GASKET INCLUDED
BLOCK FOR WASTEGATE INCLUDED
TURBO & WASTEGATE BOLTS INCLUDED

3" STAINLESS STEEL DOWNPIPE

304 STAINLESS STEEL CONSTRUCTION
V-BAND FLANGE & CLAMP

35 MM WASTEGATE

7.8 PSI SPRING INSTALLED
GASKETS & BOLTS INCLUDED

FITS ALL B SERIES MOTORS INCLUDING
CIVIC Si WITH B16A2 1999-2000 MODELS
INTERGRA B SERIES 1992 - 2000

Custom-made Equal Length Tubular Stainless Steel Turbo Manifold and Matching Down-Pipe and 5.83 psi Wastegate
Fits any b-series motor. including B16, B17, B18A, B18B, B18C, B18C5, B20B, B20Z,etc..

This manifold was custom-made to be used with a 35mm external wastegate and this manifold and down-pipe allows you to retain A/C and power steering.

This manifold and downpipe is for T3 and T3/T4 Turbos.

The manifold and down-pipe are both made out of SUS304 Hi-Grade Stainless to help disperse heat. This manifold is drag-race quality, and similarly design manifolds can be found on professional drag cars. Manifold has flange for an external wastegate. And since this manifold is tubular steel, it flows better than cheap cast iron and is less prone to cracking.

Down-pipe allows you to retain your A/C and power steering. There is a flange for the end of the down-pipe will bolt-on to your catalytic converter. Down-pipe also has a bung for the O2 sensor.

Monster B series Manifold
Domestic Shipping: $25
International Shipping: $68

MONSTER " TWISTED RAM" MANIFOLD

B SERIES B16 ,B17, B18, B20

TURBO MANIFOLD

B SERIES INTEGRA
CIVIC B SWAPS

TURBO RACE MANIFOLD 50 MM DIAMETER / 2.9 MM THICK

FEATURES :

SUPER TWISTED RAM " 50 MM " DIAMETER PIPES

2.9 MM THICK PIPING - WILL NOT CRACK

SUPER TIG WELDS - 35 OR 38MM WG FLANGE

MONSTER 50 MM DIAMETER PRIMARIES !!!!

STAINLESS STEEL CONSTRUCTION

NOTICE THE PORTED EXHAUST OUTLETS

INCREASE YOUR HP AND TORQUE

SUBSTANTIALLY

YOU ALSO GET A B SERIES GASKET
(see picture to the left)

New Integra/Civic Turbo Manifold *B Series*

Custom-made Equal Length Tubular
Stainless Steel Turbo Manifold

PLEASE TAKE A SECOND TO READ

SINCE THERE ARE MANY B SERIES MANIFOLDS TO CHOOSE FROM - HERE ARE SOME TOPICS OF INTEREST

**WE STAND BEHIND OUR ITEMS WITH A 90 DAY WARRANTY AGAINST CRACKING AND DEFECTS**
**NO BOOST CREEP - NEW WASTEGATE DESIGNED FLANGE**
**EXTRA WELDS OUTSIDE AND INSIDE THE PORTS**
**PORTED AND POLISHED / PORTS AND PRIMARIES**
**304 STAINLESS CONSTRUCTED

Fits any B SERIES MOTOR

This manifold was custom-made.

This manifold is for Garrett or Hybrid T3/T4 OR any T3 Flanged Turbo - 35 or 38 MM Wastgate Flange

The manifold is made out of SUS304 Hi-Grade Stainless to help disperse heat. This manifold is drag-race quality, and similarly design manifolds can be found on professional drag cars.

And since this manifold is tubular steel, it flows better than cheap cast iron and is less prone to cracking.

Super power gains will be easy to have with a Turbo Setup!

WHY IS OURS BETTER THAN THE OTHERS ON EBAY ?

CHECK OUT OUR MANDREL BENT TUBING
WE DO NOT USE CRUSH BENT PIPES
WE DON'T USE CHEAP 410 STAINLESS
WE DON'T USE MILD STEEL PRIMARIES
OUR PRIMARY PIPE DIAMETER IS 30% LARGER THAN THE COMPETITION

T4 "B" SERIES TURBO MANIFOLD
USA only

FITS 1990-2001 B SERIES MOTORS • FITS SWAPS • T4 TURBO FLANGE • STAINLESS STEEL CONSTRUCTION

TSUNAMI MANIFOLD (Pictures Installed)

FITS B16 / B18 / B16A / B18A / B18B / B18C INTEGRA AND CIVIC SWAP • T3/T4 FLANGE / WITH 35mm or 38mm WASTEGATE FLANGE • STAINLESS STEEL • 42MM DIAMTER RUNNERS , 1.9MM THICK • INCLUDES GASKETS AND BOLTS AND NUTS